View SBT16_7668228.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

phlatlight ? SBT16 projection chipset product data sheet confidential ? 2011 luminus devices, in c. - all rights reserved updated 05/17/11 pds-001478 rev 04 technology overview luminus devices? projection technology (pt) is an innovative solid-state light source created to replace arc lamps in projec- tion systems, enabling a new ca tegory of lamp-free projectors. enabled by unique use of photonic lattice technology, phlat- light chipsets represent a majo r breakthrough in brightness that delivers all the benefits of solid state light sources in pro- jections applications: - wide color gamut for vivid colors, exceeds ntsc. - environmentally friendly technology - mercury-fre. - instant start and re-start - no more wait time. - high reliability; no more lamp replacement. - electronic control of color points and light intensity on a frame by frame basis phlatlight products benefit fr om numerous innovations in the domain of packaging, therma l management and optical cou- pling that allow designers to achieve efficient light engine de- signs and deliver high screen brightness. angular intensity di stribution -example features ? matched rgb chipset with 1.6mm 2 emitting area designed for small, pico projector and ?value? pocket projector applications ? photonic lattice technology for very high surface brightness ? wide color gamut: red 623 nm, green 525 nm, blue 460 nm typical dominant wavelength ? single emitting area per color a llows for collection with sin- gle lens for si mplified optics ? 16:10 aspect ratio optimized for wvga, wxga or other wide aspect rati o micro-displays ? uniform surface emission ? compact, small footprint surface mount (smt) package, with built-in alignment features ? rohs compliant (eu-2002/95/ec directive) applications ? large dynamic range allows optimum performance in both battery-powered and ac powered systems ? optimized for micro-display diag onal sizes ranging from 0.2? to 0.4?. ? compatible with all micro-di splay technologies including dlp? and lcos. 0.0 0.2 0.4 0.6 0.8 1.0 1.2 -100 -80 -60 -40 -20 0 20 40 60 80 100 angle (degrees) optical power (arbitrary unit) green, blue red free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 2 ? sbt-16 ordering part numbers ordering part number 1 note 1: ordering part numbers represent bin kits (group of bins that are shippable for a given ordering part number) color min flux or power bin 2 note 2: see bin kit and flux / power bin definitions on page 3 availability description sbt-16-r-j11-mpb red 1a now red bin kit, phlatlight SBT16 surface mount device consisting of a 1.6mm 2 led, mounted on a ceramic substrate. sbt-16-r-j11-mpc 1b now sbt-16-g-j11-mpa green 1a now green bin kit, phlatlight SBT16 su rface mount device consisting of a 1.6mm 2 led, mounted on a ceramic substrate sbt-16-g-j11-mpb 1b now sbt-16-g-j11-mpc 1c now sbt-16-g-j11-mpd 1d now sbt-16-b-j11-epa blue 1a now blue bin kit, phlatlight SBT16 surface mount device consisting of a 1.6mm 2 led, mounted on a ceramic substrate sbt-16-b-j11-epb 1b now ? phlatlight ordering part number nomenclature sbt - nn - x - j11 - xyz - tr 1 note 1: for tape and reel packaging option, please add -tr to end of ordering part number. e.g. sbt-16-r-j11-mpb-tr product family chip area color package configuration bin kit 2 note 2: a bin kit represents a group of in dividual flux or power bins that are sh ippable for a given ordering part number. in order to ensure availability, individu al flux or power bins are not orderable. examples: sbt-16-r-j11-mpb is comprised of red flux bins 1a, 1b, 1c and 1d (packaging option: trays / packs) sbt-16-r-j11-mpb-tr is comprised of red flux bins 1a, 1b, 1c and 1d (packaging option: tape and reel) sbr-16-r-j11-mpb is sbt-16 red device soldered to a starboard (see p.10). note: available in sample quantities only for prototyping. packaging op- tion sbt: surface mount sbr: sbt device sol- dered to a starboard 16: 1.6mm 2 r=red g=green b=blue j11: 9.0mm x 7.25mm see page 3 for bin kit definition tr= tape & reel blank=tray/pack free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 3 ? sbt-16 bin kit 1 and flux / power bin 2,3 ,4 definitions note: please refer to ordering part number table on page 2 for bin kit availability note 1: bin kits are defined by a group of fl ux or power bins. only one flux bin will be shipped in each individual pack or ree l. a shipment will contain packs or reels of different allo wed flux or power bins for a particular or dering part number. in order to ensure availabil- ity, individual flux or power bins are not ordereable. note 2: luminus maintains a tolerance of +/-6% on flux and power measurements note 3: sbt-16 leds are tested for luminous flux and radiometric at 4a, single pulse ( 20ms) and placed into one of the above flu x or power bins. flux and power bins have been defined, but not all defined bins are currently populated. note 4: flux bin limits for red and green an d power bin limits for blue devices apply across the entire domi nant wavelength rang e for each color. (see dominant wavelength range for each color on page 4) red flux bins bin 1a bin 1b bin 1c bin 1d bin 1e bin 1f bin 1g bin 1h bin 1j red bin flux range (lm) 155-180 180-215 215-245 245-275 275-300 300-330 330-360 nd nd sbt-16-r-j11-mpb ;;;; sbt-16-r-j11-mpc ;;;; green flux bins bin 1a bin 1b bin 1c bin 1d bin 1e bin 1f bin 1g bin 1h bin 1j green bin flux range (lm) 315-355 355-395 395-430 430-470 470-510 510-550 550-600 600-660 660-725 sbt-16-g-j11-mpa ;;;; sbt-16-g-j11-mpb ;;;; sbt-16-g-j11-mpc ;;;; sbt-16-g-j11-mpd ;;;; blue power bins bin 1a bin 1b bin 1c bin 1d bin 1e bin 1f bin 1g bin 1h bin 1j blue bin power range (w) 1.54-1.75 1.75-1.95 1.95-2.10 2.10-2.30 2.30-2.50 2.50-2.75 2.75-3.00 3.00-3.30 nd sbt-16-b-j11-epa ;;;;; sbt-16-b-j11-epb ;;;;; free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 4 optical and electrical characteristics symbol red green blue unit emitting area 1.6 1.6 1.6 mm2 emitting area dimensions 1.6x1.0 1.6x1.0 1.6x1.0 mmxmm characteristics at test drive current, i f 1 note 1: test conditions: 4a, single pulse, 20ms, test temperat ure not controlled. test peak drive current 1 typ i f 4.0 4.0 4.0 a peak luminous flux 1,2 ,3 note 2: total flux from emitting area note 3: luminus maintains a tolerance of +/-6% on flux and power measurements typ v22047090 lm radiometric flux 1, 2, 3 typ r 1.3 1.0 2.0 w dominant wavelength 1 min dmin 619 516 450 nm typ d 623 525 460 nm max dmax 630 535 468 nm fwhm - spectral ba ndwidth at 50% of vtyp ? d184020nm chromaticity coordinates 4,5 note 4: in cie 1931 chromaticity diagra m coodinates, normalized to x+y+z=1 note 5: for reference only typ x 0.699 0.162 0.149 typ y 0.301 0.711 0.031 forward voltage min v fmin 2.0 3.9 3.2 v typ v f 2.4 4.9 3.9 v max v fmax 3.2 5.9 5.2 v dynamic resistance typ dyn 0.08 0.09 0.07 characteristics at pulsed drive current, i f (for information only) 6 note 6: typical performance based on sbt-16 mo unted on al coreboar d. operation at 720hz, 4a, pulsed at the specified duty cycles and at constant heat sink temperature t hs = 40oc. ( see thermal re sistance section for t hs definition.) reference duty cycle 25 50 25 % reference peak drive current typ i f 4.0 4.0 4.0 a peak luminuous flux 2 typ 215 400 80 lm device thermal characteristics thermal coefficient of photom etric flux typ -1.1 -0.2 ~0 % / oc thermal coefficient of radiometric flux typ -0.6 -0.3 -0.1 % / oc forward voltage temperature coefficient typ -3 -8 -4 mv / oc free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 5 absolute maximum ratings symbol red green ep-blue unit minimum current (cw or pulsed) 1 min 200 200 200 ma maximum current (cw) 2 max 2.4 2.4 2.4 a maximum current (pulsed) 1,3 (t<= 2.5ms, frequency > 240hz, duty cycle <60%) 4.8 4.8 4.8 a absolute maximum j unction temperature 4 max t jmax 110 150 150 oc storage temperature range -40/+100 -40/+100 -40/+100 oc note 1: product perf ormance and lifetime data is specified at recommended forward drive currents. sust ained operation at or near absolute minimum currents may result in a reduction of device performance and device lifetime compared to recommended forward drive cur- rents. note 2: luminus phlatlight leds are design ed for operation to an absolute maximum forward drive current density of 1.5a/mm 2 cw, and 3.0a/ mm 2 pulsed (f>240hz, duty cycle < 60%). please refer to absolute maximum rating table ab ove for specific absolute maximum currents for the products covered in this datasheet. product lifetime data is specified at recommended forward driv e currents. sustained operation at absolute maximum currents wil l result in a reduction of device lifetime compared to recommended forward drive currents. actual device lifetimes will also depe nd on junction temperature. refer to the lifetime derating curv es for further information. note 3: in pulsed operation, rise time from 10 to 90% of forward current should be larger than 0.5 microseconds. note 4: sustained operation at or above th e absolute maximum junction temperature (t jmax ) will result in redu ced device life time. free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 6 luminous flux variation with wavelength: v = f ( d ) at test drive current i f see note 1,3 on page 7. luminous flux variation with drive current - v = f (i f ) - typical see notes 1, 2, 3 on page 7. dominant wavelength variat ion with forward current - d = f(i f ) - typical see notes 1, 2 on page 7. 0 50 100 150 200 250 300 350 400 615 620 625 630 635 d (nm) v (lm) 200 300 400 500 600 700 515 520 525 530 535 d (nm) v (lm) 50 75 100 125 150 450 455 460 465 470 d (nm) v (lm) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 r (w) blue flux, lm blue power, w 0 100 200 300 400 500 600 700 12345 i f (a) v (lm) 0 25 50 75 100 125 150 12345 i f (a) v (lm) 0 50 100 150 200 250 300 12345 i f (a) v (lm) 618 620 622 624 626 628 630 12345 i f (a) d (nm) 515 520 525 530 535 540 12345 i f (a) d (nm) 450 452 454 456 458 460 462 464 466 468 12345 i f (a) d (nm) free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 7 forward voltage variation with drive current - v f = f(i f ) - typical see notes 1,2 on page 7. optical spectrum (typical) see note 4 on page 7. chart notes note 1: test conditions: single puls e , 20ms, test temperature not controlle d. data below 1.5a is extrapolated. note 2: yellow square indicate dev ice operating point under test conditions: 4a, single 20ms pulse, test temperature not con- trolled. note 3: luminus maintains a tolerance of +/-6% on flux and power measurements. note 4: typical spectrum at re commended peak drive current. 0 1 2 3 4 5 6 12345 i f (a) v f (v) 0 0.5 1 1.5 2 2.5 3 12345 i f (a) v f (v) 0.0 1.0 2.0 3.0 4.0 5.0 12345 i f (a) v f (v) 0 0.2 0.4 0.6 0.8 1 1.2 400 450 500 550 600 650 700 wavelength (nm) normalized radiometric power free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 8 thermal resistance r j-c 1 note 1: thermal resistance val- ues are based on finite element analysis model results 6.0 o c/w rj-hs 2 note 2: for information only. thermal resistance is measured using a sac305 solder, an al- clad mcpcb (bergquist p/n 803949-1), and egraf 1205 thermal interface material. 7.4 o c/w window ceramic substrate t j window frame die junction heat sink t hs t c al coreboard window ceramic substrate t j window frame die junction heat sink t hs t c al coreboard window ceramic substrate t j window frame die junction heat sink t hs t c al coreboard free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 9 mechanical dimensions [ (0,77,1* $5($ (0,77,1* $5($ $ $ $ % $ ? % 6(&7,21$$ % ? '$780% 72723 2)*/$66 ? 7232)(0,77,1* $5($72723 2):,1'2: ? '$780% 727232) (0,77,1*$5($ '(7$,/% 5(''(9,&( *5((1'(9,&( %/8('(9,&( 127&+ ,1',&$7(6 $12'( %$&.2)68%675$7( 5(&200(1'('/$<287 2)62/'(53$'6,6 ? red, green and blue SBT16 phlatlight tm leds are individually assembled into a smt board with a foot- print of 9.0 mm x 7.25 mm. dimension above for information only. for detailed dimensions, always refe r to the latest revision of the dwg-1493 package outline free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 10 ? mechanical dimensions - sbt-16 star notes: 1. tolerances per ipc-610, class 2. 2. for detail drawing of sbt-16, please see dwg 1493. 3. recommended mounting screw: m3 or #4 4. all dimensions in millimeters 5. all anode pads on board are interconnected . all cathode pads on board are interconnected free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 11 reflow soldering characteristics solder profile guideline note: 1. temperatures are taken and moni tored at the component copper layer note: 2. optimum profile may differ due to ov en type, circuit board or assembly layout note: 3. recommended le ad free, no-clean so lder: aim nc254-sac305 note: 4. refer to apn-001473: phla tlight soldering and handling application note for additional solder profiles and details. solder profile stage lead-free solder lead-based solder profile length, ambient to peak 2. 75 - 3.5 minutes 2.75 - 3.5 minutes time maintained above: temperature 217 oc 183 oc time maintained above: time 30 - 60 seconds 30-60 seconds cooldown rate 4o c/sec 4o c/sec cooldown duration 45 15 sec 45 15 sec free datasheet http://www.datasheetlist.com/
confidential ? 2011 luminus devices, in c. - all rights reserved pds-001478 rev 04 page 12 SBT16 - product datasheet - rev 04 shipping tray outline for detailed drawing of shipping tray, please refer to to-0977 and to-0978 document (available from luminus) $$ ? 7<3 6(&7,21$$ ',0(16,216,10,//,0(7(56 3,7&+ 3,7&+ %% ? 7<3 6(&7,21%% ',0(16,216,10,//,0(7(56 free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 13 tray packing configuration pack labeling specification (example) packing case qty/pack dimensions (wxlxh, mm) gross weight (g) pack (stack of 2 trays wi th 50 devices each) (pack is enclosed in moisture barrier bag) 100 120 x 200 x 15 101 pack label fields: ( label fields are subject to change) ?6-digitpacknumber: (luminus internal use ) ?luminus ordering part number ?luminus_product_description: (device type and color) ?quantity of devices in the pack ?part number revision: (luminus internal use) ?optional fields may include custom- er?s part number sample labels - for illustration only free datasheet http://www.datasheetlist.com/
confidential ? 2011 luminus devices, in c. - all rights reserved pds-001478 rev 04 page 14 SBT16 - product datasheet - rev 04 tape and reel outline for detailed drawing of tape and reel, please refer to to-1000 (available from luminus) empty pockets trailer 304.8 mm (19 pockets) of (250 pcs) loaded pockets of empty pockets leader 457.2mm (29 pockets) a b pockets leader end a w w b a f c b d w e detail a scale 1 : 1 unreeling direction h detail b scale 2 : 3 dimensions are in mm. (inch) 1 2 unreeling direction tape dimensions reel dimensions a w 1 w 2 b h 180 (7) 25 (.984) 27.8 (1.094) 60.0 (2.362) 13.0 (.512) w ab cd e f 24.0 (.945) 1.5 (.059) 3.9 (.157) 6.1 (.241) 1.7 (.069) 11.5 (.453) 16.0 (.630) free datasheet http://www.datasheetlist.com/
confidential ? 2011 luminus devices, in c. - all rights reserved pds-001478 rev 04 page 15 SBT16 - product datasheet - rev 04 packing configuration tape and reel labeling specification (tbd) packing reel qty/reel reel diameter (mm) gross weight (kg) tape and reel (reel is enclosed in moisture barrier bag) 250 180 tba tape and reel label fields: ( label fields are subject to change) ?6-digit bx-number:(luminus internal use ) ?luminus ordering part number ?flux bin ?quantity of devices in the pack ?optional fields may include custom- er?s part number sample labels - for illustration only sample label - illustration free datasheet http://www.datasheetlist.com/
SBT16 - product datasheet rev 04 confidential ? 2011 luminus dev ices, inc. - all rights reserved pds-001478 rev 04 page 16 the products, their specifications and other information appearing in this document ar e subject to change by luminus devices wi thout notice. luminus devices assumes no liability for errors that may appear in this document, and no liability othe rwise arising from the applicati on or use of the product or information contained herein. none of the information provided herein sh ould be considered to be a representation of the fit ness or suitability of the product for any particular application or as any other form of warranty. luminus devices? product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. nothing herein is to be construed as constituting an additio nal warranty. no infor- mation contained in this publication may be considered as a waiv er by luminus devices of any intellectual property rights that luminus devices may have in such information. phlatlight ? is a registered trademark of luminus devices, inc., all rights reserved. this product is protected by u.s. patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,87 0; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903;7,345,416; 7,348,603; 7,388,233; 7,391,0 59; 7,417,367 pat- ents pending in the u.s. and other countries. www.luminus.com history of changes rev date description of change rev 01 3/19/10 preliminary specifications rev 02 6/25/10 add preliminary specific ations for green led binkit c update max junction temperature for green and blue devices update tray packing specifications rev 03 11/08/10 add bin kit and bin definitions (p.3) add ordering part number information rev 04 04/12/11 5/17/11 add additional bin kit definitions update luminous flux and optical power specifications per test calibration update add preliminary tape and reel packaging specifications correct typographical error on p.2 free datasheet http://www.datasheetlist.com/

▲Up To Search▲

Price & Availability of SBT16

	To Download SBT16 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .